Technical Specs Table
Description
Some gear just needs a dedicated spot of its own — but a permanent shed isn't always practical, possible, or worth the cost. The HomeDude 6 x 6 ft Outdoor Storage Shelter is a fully enclosed, non-permanent storage space: a powder-coated steel frame, a 3-layer PE cover over all four sides, 4 ground anchors that fasten it to the ground, and 8 ratchet tie-downs that tension the cover against the frame. Every tube size is listed below, so you can see exactly what you're buying.
*Dimensions*
The shelter measures 6 ft x 6 ft x 6 ft (183 x 183 x 183 cm), with a front door opening of 3.6 ft x 4.6 ft (110 x 140 cm) and a net weight of 20.5 kg (45.15 lbs).
*Frame & Structure*
The frame is powder-coated steel in Outdoor Silver Gray (HG-8180C). Rafter and extension poles are 34 mm tubing with a 0.65 mm wall, the four bent corner legs are 34 mm with a thicker 1.4 mm wall, cross rails are 28 mm with a 0.7 mm wall, and the 3-way peak and side connectors are 38 mm with a 1.2 mm wall. Eight 3-way cross rail clamps in 1.5 mm zinc-plated steel plate complete the frame hardware.
*Cover*
The cover is made from 150 g/m², 3-layer PE material in Beige with heat-sealed seams, built with waterproof, UV-resistant, and ripstop construction as component-level material properties.
*Enclosure & Access*
All four sides are covered: the roof tarp covers the roof and sides, a fixed back panel closes the rear, and the front door panel opens on a full-width zipper. Roll the door up and it secures in the open position, leaving a 3.6 ft x 4.6 ft (110 x 140 cm) opening. The back panel has no zipper and does not open.
*Anchoring Kit*
Four zinc-plated ground anchors (10 mm round steel) fasten the shelter to the ground, supplied with 4 steel cables and 4 cable clamps. Eight ratchet tie-downs tension the cover against the frame. All M6 frame hardware is included — 4 nuts, 4 M6x40 bolts, and 4 washers.
*Packaging*
Shipping carton: 1130 x 380 x 130 mm, 22 kg.
FAQ
Common Questions